{"product_id":"xbogo-buy-xbm10s-xcm7s-get-xam9s-free","title":"GripEdge | Ultimate G-FORS Socket Extractor Bundle | Buy XBM10S \u0026 XCM7S Get XAM9S Free","description":"\u003ch2\u003eBuy 2, Get 1 Free: The Complete G-FORS Socket Extractor Bundle\u003c\/h2\u003e\n\n\u003cp\u003eFastener failure is a geometry problem. Once a hex head rounds past its flats, a standard six-point socket has nothing left to engage, and a tapered extractor only bites at its widest point before it cams out and polishes the head smooth. This bundle solves that across the full working range. Pair the \u003ca href=\"https:\/\/www.gripedgetools.com\/products\/10pc-extractor-metric\"\u003eXBM10S 10-Pc 3\/8\" Drive Metric set\u003c\/a\u003e with the \u003ca href=\"https:\/\/www.gripedgetools.com\/products\/rpt-socket-extractor-set-7-pc-1-2-dr-metric\"\u003eXCM7S 7-Pc 1\/2\" Drive Metric set\u003c\/a\u003e, and the \u003ca href=\"https:\/\/www.gripedgetools.com\/products\/9pc-extractor-metric\"\u003eXAM9S 9-Pc 1\/4\" Drive Metric set\u003c\/a\u003e ships free. Together they deliver continuous metric coverage from 4mm through 25mm across all three common drive sizes, with a single extraction principle behind every socket.\u003c\/p\u003e\n\n\u003cp\u003eEach set is built on the same patented G-FORS™ geometry, so engagement behavior is identical whether you are removing a 6mm socket cap screw or a 24mm lug nut. Nothing in the lineup is a compromise piece.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the bundle\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.gripedgetools.com\/products\/10pc-extractor-metric\"\u003eXBM10S: 10-Pc 3\/8\" Drive Metric\u003c\/a\u003e\u003c\/strong\u003e — Sizes 10-19mm. The primary-range set covering the bolt and stud sizes most engine, chassis, and drivetrain work lives in.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.gripedgetools.com\/products\/rpt-socket-extractor-set-7-pc-1-2-dr-metric\"\u003eXCM7S: 7-Pc 1\/2\" Drive Metric\u003c\/a\u003e\u003c\/strong\u003e — Sizes 19-25mm. Heavier-wall sockets rated for the higher breakaway torque of large, corroded, or seized fasteners.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.gripedgetools.com\/products\/9pc-extractor-metric\"\u003eXAM9S: 9-Pc 1\/4\" Drive Metric\u003c\/a\u003e\u003c\/strong\u003e (FREE) — Sizes 4-12mm. The small-fastener range for tight-access and low-torque applications where control matters more than mass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eThe engineering behind the grip\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStraight-cut, non-tapered bore.\u003c\/strong\u003e Where tapered extractors contact the fastener at a narrow band and wedge material outward, the G-FORS™ profile is cut straight so its grooves make full-length contact along the fastener sidewall. Load distributes over the entire engagement depth rather than a single point, and the geometry pulls material inward to increase bite as torque rises. The result is reliable purchase on fasteners rounded up to 100%.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated G-FORS™ pusher rod.\u003c\/strong\u003e Extraction is only half the job; clearing the socket is the other half. Thread the pusher rod through the rear of the extractor and the extracted stud, bolt, or screw drives straight out. No bench vice, no hammer and punch, no risk to the socket's internal geometry.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBi-directional engagement.\u003c\/strong\u003e The profile grips on both left and right-hand threads, which lets you work a seized fastener back and forth to break the corrosion bond before final removal. A compromised fastener can also be reinstalled temporarily when a replacement is not on hand.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial and finish.\u003c\/strong\u003e Premium Cr-Mo steel construction for the strength and fatigue resistance required under impact, a corrosion-resistant coating, and laser-marked sizing for legibility in low light. Every socket is hand and impact ready.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eTwo sets, three drive sizes, one free, and one extraction principle from the smallest grease nipple to the most stubborn lug lock. When others fail, GRIP IT.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eFor a full breakdown of the extraction geometry, see our \u003ca href=\"https:\/\/www.gripedgetools.com\/pages\/gfors-technology\"\u003eG-FORS™ Technology page\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e","brand":"GRIPEDGE Tools","offers":[{"title":"Default Title","offer_id":52520580219191,"sku":"XBOGO","price":531.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/2543\/1863\/files\/XBOGO_WB_Edit.jpg?v=1782913729","url":"https:\/\/www.gripedgetools.com\/products\/xbogo-buy-xbm10s-xcm7s-get-xam9s-free","provider":"GRIPEDGE Tools","version":"1.0","type":"link"}