{"product_id":"gripedge-7-16-hex-stubby-flex-head-low-profile-dual-action-driver-ratchet","title":"GripEdge | 7\/16\" Hex Stubby Flex Head Low-Profile Dual Action Driver Ratchet","description":"\u003cp\u003eThe standard DFRA6572 solved the vertical clearance problem: paired with a GripEdge Dual Action Driver bit, it produces a 22mm combined stack height, the lowest available. The DFRA3572 solves the horizontal one. It keeps the same head, mechanism, and stack height on a 3.5\" body, 3\" shorter than the standard ratchet, so it fits and swings where a full-length handle hits a firewall, frame member, bulkhead, or housing before completing a stroke. The short lever arm also gives finer control over small and delicate fasteners, where a longer handle makes it easy to overtorque.\u003c\/p\u003e\n\n\u003cp\u003eThe head is where the clearance comes from. A patented recess ring inside the ratchet head lets a GripEdge Dual Action Driver bit seat deeper into the tool than any other ratchet accepts, so the bit and ratchet function as one integrated unit rather than two stacked parts. That advantage only applies with GripEdge 1\/4\" drive DAD bits; a standard hex bit socket gives it up entirely.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e22mm combined stack height.\u003c\/strong\u003e An 8.0mm head paired with a seated DAD bit measures 22.0mm on the fastener, compared with 33.5mm for an average 1\/4\" ratchet and bit socket and 23.5mm for the leading low-profile competitor running a GripEdge DAD bit.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3.5\" stubby body.\u003c\/strong\u003e The shortest ratchet in the DAD lineup fits into pockets and cavities where a longer handle has no room to move, and keeps the tool compact enough to carry in a pocket or small kit. The trade is leverage: for seized or high-torque fasteners, the 6.5\" DFRA6572 or 10\" DFRA1072 is the better choice.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContoured handle.\u003c\/strong\u003e The handle profile is shaped for grip stability and control, reducing hand fatigue over extended use, especially in a short-handle tool driven mostly by the fingers and palm.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReversible 72-tooth mechanism, 5 degree swing arc.\u003c\/strong\u003e Many low-profile ratchets are not reversible. This one is, and its fine tooth count engages with minimal handle travel, which matters most on a stubby handle where every degree of swing is limited.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-locking flex head, 0 to 180 degrees.\u003c\/strong\u003e A friction pivot holds position through the full range without a lock. Omitting the lock saves parts and height and removes a component that can fail under load.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlush-mount selector switch.\u003c\/strong\u003e The direction switch sits flush with the head, so it cannot snag, catch on surrounding components, or flip mid-stroke. It is glove friendly and unique among low-profile ratchets.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-backdrag mechanism.\u003c\/strong\u003e The handle resets on the return stroke without pulling the bit or fastener backward, which keeps small and lightly seated fasteners from turning with the handle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eField-serviceable.\u003c\/strong\u003e The head uses exposed fasteners and replaceable gear assemblies, the flex joint is replaceable, and dedicated repair kits are available, so a worn ratchet gets rebuilt in the field instead of replaced.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eForged Cr-Mo steel, hi-polish chrome.\u003c\/strong\u003e Chrome-molybdenum construction resists wear and deformation under load, with a chrome finish for corrosion resistance and easy cleanup. ASME B107 compliant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBuilt for automotive, aerospace, industrial maintenance, and precision fabrication work where both stack height and swing room are tight.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eDFRA3572\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDrive size\u003c\/td\u003e\n\u003ctd\u003e1\/4\" square\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOverall length\u003c\/td\u003e\n\u003ctd\u003e88.9mm (3.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHead height\u003c\/td\u003e\n\u003ctd\u003e8.0mm (0.315\")\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHead width\u003c\/td\u003e\n\u003ctd\u003e23.0mm (0.905\")\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCombined stack height with DAD bit\u003c\/td\u003e\n\u003ctd\u003e22.0mm (0.866\")\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTooth count\u003c\/td\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSwing arc\u003c\/td\u003e\n\u003ctd\u003e5 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFlex range\u003c\/td\u003e\n\u003ctd\u003e0 to 180 degrees, non-locking friction pivot\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDrive cavity\u003c\/td\u003e\n\u003ctd\u003e7\/16\" hex pass-through, 1\/4\" drive DAD bits only\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged chrome-molybdenum (Cr-Mo) steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eHi-polish chrome plating\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eServiceability\u003c\/td\u003e\n\u003ctd\u003eReplaceable gear assemblies and flex joint, repair kits available\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eASME B107 compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEngineering\u003c\/td\u003e\n\u003ctd\u003eDeveloped, engineered, and tested in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\n\u003cp\u003eThis ratchet works only with GripEdge 1\/4\" drive Dual Action Driver bits. The 7\/16\" hex pass-through cavity is sized for 1\/4\" drive DAD bodies; 3\/8\" drive Dual Action Drivers will not fit. Compatible sets include:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/www.gripedgetools.com\/products\/gripedge-10-pc-rpt-1-4-drive-low-profile-metric-hex-dual-action-driver-set\"\u003e\u003cstrong\u003eDDHAM10S: 10-Pc Metric Hex Dual Action Driver Set\u003c\/strong\u003e\u003c\/a\u003e. 2mm through 10mm, all sizes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/www.gripedgetools.com\/products\/gripedge-10-pc-rpt-1-4-drive-low-profile-sae-hex-dual-action-driver-set\"\u003e\u003cstrong\u003eDDHAS10S: 10-Pc SAE Hex Dual Action Driver Set\u003c\/strong\u003e\u003c\/a\u003e. 5\/64\" through 3\/8\", all sizes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/www.gripedgetools.com\/products\/gripedge-13-pc-rpt-1-4-drive-low-profile-star-dual-action-driver-set\"\u003e\u003cstrong\u003eDDSA13S: 13-Pc Star (Torx Compatible) Dual Action Driver Set\u003c\/strong\u003e\u003c\/a\u003e. T8 through T60, all sizes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/www.gripedgetools.com\/products\/gripedge-12-pc-1-4-3-8-drive-low-profile-triple-square-dual-action-driver-bit-set\"\u003e\u003cstrong\u003eDDTS12S: 12-Pc Triple Square Dual Action Driver Set\u003c\/strong\u003e\u003c\/a\u003e. M4 through M14 only. The M16 and M18 in this set are 3\/8\" drive and will not fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eSame 22mm stack height, a fraction of the swing room.\u003c\/p\u003e","brand":"GripEdge Tools","offers":[{"title":"Default Title","offer_id":53037130285367,"sku":"DFRA3572","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/2543\/1863\/files\/DFRA3572_1_1.jpg?v=1792612608","url":"https:\/\/www.gripedgetools.com\/products\/gripedge-7-16-hex-stubby-flex-head-low-profile-dual-action-driver-ratchet","provider":"GRIPEDGE Tools","version":"1.0","type":"link"}